From Classic Cars to One Knob for Everything: The Story Behind TuneX

12
0
Share:

How an idea from a classic car install became the first control knob that runs more than one DSP, your phone and your lighting, all from one small round screen.

By Jared Serna

It started with a classic car 

It all started while I was working on a classic car. Classic car owners want modern sound, but they don’t want the car to look modern. So we’d do what a lot of shops do: install a DSP amplifier
with a Bluetooth module, tuck everything out of sight, and hand the keys back with one line of advice: “You just control the volume and everything from your phone.” It works. But I kept watching customers reach for their phones while driving, unlock the screen and dig through an app just to turn the sub down. In a car that’s supposed to feel timeless, that never sat right with me. So I started asking a simple question: what if there were a small touchscreen knob that controlled the phone, something the customer could actually see and feel? And in a classic car, what if it could be mounted somewhere concealed, so the dash stays factory?

One question led to the next

Once I had that first idea, the questions kept coming.

If the knob could control the phone, could it control the DSP too? Could it talk to the vehicle’s CAN network? What about the aftermarket lighting kits we install every week? Could one knob
run all of it? That’s where the long nights started. After full days at work, I’d sit down and write code, test, break things, and test again. Bit by bit, that list of “I wonder if…” questions turned into a working product. That product is TuneX.

What TuneX is

TuneX is a hand-built rotary knob with a round touchscreen. You turn it, press it, swipe it or tap it, and it runs the systems in the car from one spot.

• More than one DSP brand. As far as I know, TuneX is the first control knob that isn’t tied to one DSP manufacturer. It plugs into the DSP’s own remote port with a cable we build by hand
for that DSP. There’s nothing to cut or splice. From the knob you get master volume, subwoofer level, presets and, depending on the DSP, tone, balance, fader and input selection.

• Your phone. It pairs over Bluetooth. Play, pause and skip, see the song and artist on screen, handle calls and use your voice assistant. With an iPhone you can even see the album art.

• Your lighting. It controls popular Bluetooth LED controllers, including on/off, brightness, colours and the full list of built-in effects by name. The ring of LEDs around the knob can
match the lights in the car.

• All at the same time. This is the part people notice first. You don’t pick one job for the knob. Song info can show right on the DSP screen, so you can watch what’s playing while you set
the sub level. A swipe takes you to the lights.

Setup doesn’t need an app. The knob makes its own Wi-Fi setup page, so the installer or customer can configure it from any phone. Firmware updates are installed the same way, so the knob keeps getting better after it’s in the car.For installers, that means one control solution across the different DSPs you already sell, and a  cleaner hand-off to the customer. For the customer, it means fewer reasons to pick up the phone while driving.

Where we are today

The hardware side is ready. Mass production for the knob’s housing and its mount is pretty much done. Right now we’re beta testing with more DSPs and in more cars, and early feedback from
people who’ve used it has been fantastic. There’s much more coming. Steering-wheel radio control is in testing now. Vehicle data over the CAN network is on the roadmap. More DSPs and lighting controllers are planned, each added through free firmware updates.

Thank you

No project like this gets built alone.

A big shout-out to the 12 Volt Giggity Call, which meets every Monday and Thursday. The people on that call have pushed this project forward and helped me come up with more ideas
than I could have on my own.

And thank you to Mike Hungerford, who came up with the name: Project TuneX.

What started as a way to keep a customer’s phone in their pocket has turned into something I’m really proud of. If you’re an installer or an enthusiast who wants to follow along or get on the launch list, visit agent12volt.com/tunex or email ProjectTuneX@gmail.com.

TuneX is not affiliated with or endorsed by any DSP, lighting or phone brand. Brand compatibility is listed on the TuneX website.


Discover more from Mobile Electronics

Subscribe to get the latest posts sent to your email.

Share: